Skip to content
Nozzle & Vernier
‹ All work

Microwell washer housing

The housing, bottles and tubing caps for a microwell plate washer prototype, designed for the client to print himself.

DesignSolidWorksFunctional prototypeLeak-tested

Render of the white casing with two bottles standing in their holders, caps on
The job
A client building a microwell plate washer for lab use needed the housing and the fluid parts designed, so he could print and assemble the prototype himself.
What I did
Designed a 240 mm casing with two bottle holders and a divided floor, a lid, bottles with an outlet nozzle at the base, and caps with one and three hose barbs for the tubing. In the first test a cap seeped slightly with the bottle turned upside down, so I added an O-ring groove to both caps.
How it turned out
With the O-ring fitted, the client reports no leaks. The parts were sent as STEP and STL files and printed on his side.
Software
SolidWorks
Parts
Casing, lid, two bottles, two caps
Casing
240 x 240 x 155 mm
Sealing
O-ring groove in the caps
Describe the part you need

More of this job

The client's printed parts: bottles dropped into their holders, then the black lid closed on the casing
Exploded render: lid, bottle caps, bottles and casing
Exploded render: lid, bottle caps, bottles and casing
Render of the two caps: three hose barbs on one, one on the other
Render of the two caps: three hose barbs on one, one on the other
The client's print: a bottle in its holder, its outlet nozzle passing through the slot
The client's print: a bottle in its holder, its outlet nozzle passing through the slot
The client's print with the black lid closed
The client's print with the black lid closed