Skip to content
Nozzle & Vernier
‹ All work

Stopper swaging die and jig

A die tool and jig that press a stopper onto a groove on the rod, checked in section before anything was machined.

DesignSolidWorksToolingDie + jig

Section view of the rod held in the jig with the stopper and die around it
The job
A stopper has to be locked onto a groove near the end of each rod, the same way every time, by swaging: pressing its edge inward.
What I did
Designed a die tool with a tapered mouth and a bottom jig that holds the rod, then checked the swaging in a section of the assembly to see the stopper edge roll into the groove.
How it turned out
Drawings for the die and the jig, ready for the machine shop.
Software
SolidWorks
Parts
Die tool and bottom jig
Process
Swaging a stopper onto a rod groove
Describe the part you need

More of this job

Section of the die pressing down on the stopper
Section of the die pressing down on the stopper
Close-up section: the stopper edge rolled into the groove
Close-up section: the stopper edge rolled into the groove
Drawing of the die tool: section, detail of the tapered mouth and an isometric view
Drawing of the die tool: section, detail of the tapered mouth and an isometric view
Drawing of the bottom jig that holds the rod
Drawing of the bottom jig that holds the rod